T-APS-R15 expansion cabinet

Post Reply
Posts: 3
Joined: February 23rd, 2010, 2:32 pm

T-APS-R15 expansion cabinet

Post by evgueny » July 16th, 2010, 3:30 pm

Per T-APS-R15 manual it's possible to add 7 additional chassis to the host chassis and manage all of them via single IP address. Is MCU card needs to be installed in every expansion chassis in this case?
Thank you,

Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ

Re: T-APS-R15 expansion cabinet

Post by DP_Sam » August 16th, 2010, 9:23 am

Yes, multiple T-APS-R15 can be managed via a single IP address.
Each chassis must have an MCU card installed.

( evgueny was contacted directly to discuss his specific application. I include the answer here for others who may have the same question)
Sam Savoye
Dataprobe Tech Support

Post Reply