Power Requirements for K-AB-530

Post Reply
Posts: 1
Joined: March 17th, 2010, 1:49 pm

Power Requirements for K-AB-530

Post by mbarnes » March 17th, 2010, 1:55 pm

I acquired a K-AB-530 single switch in a standalone case. However, no power supply came with it.

What are the power requirements for this box? I know most cards use 24VDC, but what is current requirement? I have a variety of 24VDC power supplies, but I'd rather try to meet the current needs, but not use a much higher current supply than necessary.


Michael Barnes

Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ

Re: Power Requirements for K-AB-530

Post by DP_Sam » March 17th, 2010, 5:07 pm

The standard power supply for the K-AB-530 is +24VDC with 570mA max.
Typical draw is less than that, but I would recomend using at least 500mA supply.
(to handle any potential inrush current)

We do still sell replacement supplies for that unit. Feel free to contact the sales department.
1-201-934-9944 option 1 for sales.
Sam Savoye
Dataprobe Tech Support

Post Reply