Page 1 of 1

iBoot-G2 Time Server

Posted: January 10th, 2012, 12:07 pm
by optostest
For some reason, I cannot seem to pick up the current date/time from any NTP time servers when connected to our company network. The iBoot configures the date/time correctly when run on my home network.

Can anyone advise on what might be being blocked (port or other..) on my work network?

Can the iBoot be configured to pick up the time/date from an XP PC?

Any advice welcome as the schedule fucntionality doesn't appear to work unless this gets picked up.

Re: iBoot-G2 Time Server

Posted: January 31st, 2012, 9:25 am
by DP_Sam
The iBoot-G2 supports Time protocol (port 37) and NTP (port 123).