Search found 124 matches

by DP_Sam
September 23rd, 2014, 5:06 pm
Forum: iBootBar
Topic: SMTP problem
Replies: 2
Views: 19569

Re: SMTP problem

I recognize that many online providers have now begun to require SSL for their E-mail accounts. The iBootBar will still require an email server with a non SSL account to use. Future iBootBar revisions may support SSL connections. I did some quick research online today (9-23) and setup a free account...
by DP_Sam
August 1st, 2014, 4:11 pm
Forum: iBoot
Topic: Unable to update firmware on G2+
Replies: 2
Views: 26825

Re: Unable to update firmware on G2+

I am sorry you are having issue with your unit, I am sure we can work it out. Version 1.10.11.14 is the correct and current DMU. As you have surmised, the discover MUST find the unit in order to do the upgrade. This is the best way to confirm the unit is local and can be upgraded. If you use device ...
by DP_Sam
June 11th, 2014, 2:37 pm
Forum: iBootBar
Topic: Autoping, Cycle and Delays
Replies: 2
Views: 20182

Re: Autoping, Cycle and Delays

Typically, the autoping would be setup, and when the time came to cycle the outlet, the off time would be a maximum of 99 seconds. (The iBootBar has a maximum cycle time of 99 seconds. program with set cycle 99) However, there is a work around that may help if you need 120 seconds of off time. These...
by DP_Sam
May 15th, 2014, 1:35 pm
Forum: Other Products / Topics
Topic: iBoot DC Relay Specs
Replies: 2
Views: 38041

Re: iBoot DC Relay Specs

Andrew,

I can not tell if you can remove the cleanup circuit. My guess is probably.
This link is the data sheet for the relay inside the unit. How long have you had the iBoot-DC? What is the Serial number?
by DP_Sam
May 7th, 2014, 9:17 am
Forum: iBoot
Topic: Log of activity
Replies: 1
Views: 24263

Re: Log of activity

Good Question Tomster2. Enable scheduling, even without programming any events, this will enable a log of events. setup|schedule Scheduling will require that the iBoot has access to a Time Server. (local or public) Since you unit has internet access you can use any active government time server as t...
by DP_Sam
April 30th, 2014, 12:39 pm
Forum: Redundancy Switching
Topic: Revision History - 1340065 000 to 002
Replies: 0
Views: 21699

Revision History - 1340065 000 to 002

These revisions refer to RSS Controller Card model number 1340065. Serial number revisions 1340065 000 xxxxx through 1340065 002 xxxxx . Newer Serial numbers cannot upgrade to these firmware revisions. Serial number revision 1340065 003 xxxxx and newer Click here for upgrading the newer serial numb...
by DP_Sam
April 30th, 2014, 12:02 pm
Forum: Redundancy Switching
Topic: Revision History - IPC-16-R 1340065 003 and Higher
Replies: 0
Views: 20596

Revision History - IPC-16-R 1340065 003 and Higher

These revisions refer to RSS Controller Card IPC-16-R model number 1340065. Serial number revision 1340065 003 xxxxx and higher. Older Serial numbers cannot upgrade to these firmware revisions. Serial number revisions 1340065 000 xxxxx through 1340065 002 xxxxx Click here for upgrading the older se...
by DP_Sam
April 30th, 2014, 9:46 am
Forum: iBoot
Topic: Reboot Sonicwall after delay
Replies: 6
Views: 41436

Re: Reboot Sonicwall after delay

Yes, you understand correctly. But that is because of the autoping settings. Assuming the settings below... IPAddress is 8.8.8.8 Frequency is 10 Fail Count is 3 A/B Logic is A only Control is Main Action is Cycle (cycle) 1 Times Wait 2 seconds The iBoot-G2+ will be ping every 10 seconds. Each ping w...
by DP_Sam
April 29th, 2014, 3:20 pm
Forum: iBoot
Topic: Cycle time not understood
Replies: 1
Views: 22844

Re: Cycle time not understood

The 30 seconds should be the cycle time used. (You are not missing anything) After pressing the save, you do not need top press the reset though. The reset button would be to clear the setting changes in the form before hitting save. I suspect, there is another setting in your unit making the outlet...
by DP_Sam
April 29th, 2014, 3:17 pm
Forum: iBoot
Topic: Reboot Sonicwall after delay
Replies: 6
Views: 41436

Re: Reboot Sonicwall after delay

OOps, the answer I gave was based on the delay as applied in the iBootBar and an outet group. The iBoot-G2+ and EXP1 outlet when linked will use the delay to calculate when to start the second cycle. So with a setting of 10 seconds for cycle and a 30 second delay, if you select Main and EXP1 outlet ...