IPO8

Post Reply
rlose
Posts: 1
Joined: August 3rd, 2010, 2:43 pm

IPO8

Post by rlose » August 3rd, 2010, 2:46 pm

Can anyone give me an exsample for bat file to open gate and close

DP_Sam
Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ
Contact:

Re: IPO8

Post by DP_Sam » August 3rd, 2010, 3:56 pm

There is a control protocol document available here:
http://dataprobe.com/support/manuals/ct ... 00218e.pdf

There is also a utility we have that will translate the batch file command line parameters to the DxP protocol and control the relays. (and therefore your gate)

The program and sample batch file is on the resource page for the ipio8 under C Examples.zip.
Or you can directly download from here is you prefer...
http://dataprobe.com/files/control/dxp_1.2.zip
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com

Post Reply