ESC control (K-16 vs. IPC-16-R)

Post by **DP_Sam** » February 5th, 2015, 10:44 am

This note is for original customers that use their own program to control the original K-16 switch with escape sequence control, and have replaced with new RSS systems and the IPC-16-R controller card.

Upgrade or confirm the firmware in the IPC-16-R is the latest version. (1.01.070 or better)
Make the password match.
- The original K-16 used PASS as the default password.
  The IPC-16-R uses admin as the default password.
- Change the IPC-16-R password to be PASS with "set password PASS"
  OR
- Change your program to use the new password admin.

If you are having difficulties, feel free to post to this forum, or contact technical support directly.