ESC control (K-16 vs. IPC-16-R)

ESC control (K-16 vs. IPC-16-R)

Postby DP_Sam » February 5th, 2015, 10:44 am

This note is for original customers that use their own program to control the original K-16 switch with escape sequence control, and have replaced with new RSS systems and the IPC-16-R controller card.

  • Upgrade or confirm the firmware in the IPC-16-R is the latest version. (1.01.070 or better)
  • Make the password match.
      The original K-16 used PASS as the default password.
      The IPC-16-R uses admin as the default password.
    • Change the IPC-16-R password to be PASS with "set password PASS"
      OR
    • Change your program to use the new password admin.
If you are having difficulties, feel free to post to this forum, or contact technical support directly.
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com
DP_Sam
 
Posts: 123
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ

Return to Redundancy Switching

Who is online

Users browsing this forum: No registered users and 1 guest

cron