Disable Authentication

Post Reply
Posts: 1
Joined: January 3rd, 2011, 11:47 pm

Disable Authentication

Post by gautam3lee » January 3rd, 2011, 11:49 pm

We are using the iBootBar with our application and are communicating with it using the serial port.
Is there a way to disable the authentication and let all commands work without having to log in ever?

Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ

Re: Disable Authentication

Post by DP_Sam » January 6th, 2011, 9:55 am


The short answer...
  • The iBootBar does not have the ability to eliminate the logon prompt.
The long answer...
  • There is a different code referred to as the iBootBar Precision.
    read about it here: http://www.dataprobe.com/ibootbar_remot ... bprec.html
    this version supports the RPS and iPal protocol via the serial port. these protocols do not require a logon to be used. sometimes this code is a better fit when automating control of an iBootBar from a control system.
Sam Savoye
Dataprobe Tech Support

Post Reply