Disable Authentication

Disable Authentication

Postby gautam3lee » January 3rd, 2011, 11:49 pm

Hi,
We are using the iBootBar with our application and are communicating with it using the serial port.
Is there a way to disable the authentication and let all commands work without having to log in ever?
Thanks
Gautam
gautam3lee
 
Posts: 1
Joined: January 3rd, 2011, 11:47 pm

Re: Disable Authentication

Postby DP_Sam » January 6th, 2011, 9:55 am

Guatam,

The short answer...
    The iBootBar does not have the ability to eliminate the logon prompt.

The long answer...
    There is a different code referred to as the iBootBar Precision.
    read about it here: http://www.dataprobe.com/ibootbar_remote_reboot/ibbprec.html
    this version supports the RPS and iPal protocol via the serial port. these protocols do not require a logon to be used. sometimes this code is a better fit when automating control of an iBootBar from a control system.
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com
DP_Sam
 
Posts: 123
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ


Return to iBootBar

Who is online

Users browsing this forum: No registered users and 1 guest

cron