Timed events not working

Post Reply
sterhv
Posts: 19
Joined: May 4th, 2014, 6:06 pm

Timed events not working

Post by sterhv » December 19th, 2016, 9:41 am

Timed events stopped working on both iBootBars connected to network. Tried switching Use NTS Yes to No and vise versa, rebooting, powering off and on - no effect. The IbootBar not connected to network (dead ethernet port) works OK. Any idea what's wrong ?
Thaks in advance.

DP_Sam
Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ
Contact:

Re: Timed events not working

Post by DP_Sam » December 21st, 2016, 10:37 am

In most cases the iBootBar will need to have a network connection to have the correct time to run the scheduled event.
Set the Use NTS to no, since there is not network, and be sure the time is set on the device.
There is no battery backup, so set the time after plugging in where is needs to be connected.
Power loss to the device will cause loss of time in your case.

Sam
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com

sterhv
Posts: 19
Joined: May 4th, 2014, 6:06 pm

Re: Timed events not working

Post by sterhv » December 29th, 2016, 11:44 pm

DP_Sam wrote:In most cases the iBootBar will need to have a network connection to have the correct time to run the scheduled event.
Set the Use NTS to no, since there is not network, and be sure the time is set on the device.
There is no battery backup, so set the time after plugging in where is needs to be connected.
Power loss to the device will cause loss of time in your case.

Sam
The problem is seen on network connected iBootBars and setting the Use NTS to no with correct time setting makes no defferent. The not-connected iBootBar scheduled events works fine.

sterhv
Posts: 19
Joined: May 4th, 2014, 6:06 pm

Re: Timed events not working

Post by sterhv » December 29th, 2016, 11:54 pm

Found the problem - all timed events switched to start date from Nov 2017, can't realize how and why ...

Post Reply