Revision History - iBoot-G2S

Moderator: DP_Sam

Locked
DP_Sam
Posts: 124
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ
Contact:

Revision History - iBoot-G2S

Post by DP_Sam » December 14th, 2015, 5:34 pm

These revisions refer to the iBoot-G2 model number 1410046.

iBoot-G2+ Upgrade requires the use of the DMU program available here: Information about the DMU program is available online here: Upgrade method is described in the current iBoot-G2S manual available here: Click Here for the current Manual

The Quick Start Guide for the iBoot-G2S is available here: Click Here for current Quick Start Manual

iBoot Utility with Heartbeat Generator and Graceful Shutdown Utility available here: setup_iboot_utility_v2.10.09.exe
And manual for the iBoot Utility here: iboot_utility_v130917e.pdf

__________
With the exception of the network settings, upgrading code from 1.31.12 or older will reset factory defaults.
  • (The network settings will not be affected)
If you register to the cloud and receive the "Error: All Ready Registered" message instead of the code:
  • Factory default has cleared the old registration code and you will need a new one.
  • Delete the device from the cloud account in order to re-register to the cloud.
  • You can delete the device before or after the upgrade.
__________
1.41.61 (Mar 2019) This version improves the following features:
  • Improved DHCP function
    (Lease time renewal)
Additional New Hardware improvement (Serial numbers xxxxxxx 001 xxxxx and above)
  • All variables stored EEPROM (not FLASH)
Existing iBoot-G2S Hardware (serial number xxxxxxx 000 xxxxx)
uses Flash RAM and will display iBoot-G2+ logos and default names, but the switch will still function as normal.

Download iboot-g2s_v1.41.61.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.40.60 (Aug 2018) This version address adds or improves the following features:
  • Improved Soft Reboot Reliability
  • Refreshed Webpage Interface
  • Refreshed Mobile Web Page Interface
  • Fixed iBoot In Use Error Message Issues
  • Improved Operation with Safari on apple MAC
  • Access by Name using LLMNR on networks that support it
  • Added a Disable Off feature to not allow an outlet remain off
  • Send Location Name to the Cloud when registering
    (feature enabled when cloud interface updated)
  • Hide any unused expansion ports from status page
  • Name the outlets
  • Scheduled events increased to 14
  • Daylight Savings Time CLI commands added
  • DST Start and Stop settings for Southern Hemisphere fixed
  • Other Operational Improvements and Bug Fixes
Additional New Hardware improvement (Serial numbers xxxxxxx 001 xxxxx and above)
  • All variables stored EEPROM (not FLASH)
Existing iBoot-G2S Hardware (serial number xxxxxxx 000 xxxxx)
uses Flash RAM and will display iBoot-G2+ logos and default names, but the switch will still function as normal.

Download iboot-g2s_v1.40.60.g2u [ 252Kb ] here: Click Here
The iBoot-G2+ manual for this version is available here: Click Here for this version Manual
The iBoot-G2+ Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.31.12 (Mar 2016) This version address adds or improves the following features:
  • February Scheduled Events did not work in a leap year
  • Can’t set February 29th in a leap year
Download iboot-g2s_v1.31.12.g2u [ 228Kb ] here: Click Here
The iBoot-G2S manual for this version is available here: Click Here for this version Manual
The iBoot-G2S Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.30.6 (Dec 2015) This version address the following issue:
*functionally same as iBoot-G2+ v1.30.161
  • DHCP is Default
  • DHCP assigned address will allow firmware upgrade
  • DHCP feature improvement
  • URL Control with response
  • URL Query status
  • Time Server - URL or IP Address
  • Time Server - Daylight Savings Available
  • Scheduled Events - Place event on Hold
  • Autoping - Ping URL or IP Address
  • Autoping - Restart delay timer setting
  • iBoot Cloud Service reliablity improved
  • Mobile webpages improved
Download iboot-g2s_v1.30.6.g2u [ 228Kb ] here: Click Here
The iBoot-G2S manual for this version is available here: Click Here for this version Manual
The iBoot-G2S Quick start manual for this version is here: Click Here for this Quick start Manual
__________
1.0.4 (Jun 2015)
  • This was the initial release:
Download iboot-g2s_v1.0.4.g2u [ 230Kb ] here: Click Here
The iBoot-G2S manual for this version is available here: Click Here for this version Manual download
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com

Locked