G2 with external switch - possible ?

Moderator: DP_Sam

G2 with external switch - possible ?

Postby sterhv » November 4th, 2014, 3:50 am

Greetings,
I wonder if an external switch (ex. pressure switch) could be connected to a G2 additional terminal (DxP interface?) to control it ?
Thanks in advance.
sterhv
 
Posts: 19
Joined: May 4th, 2014, 6:06 pm

Re: G2 with external switch - possible ?

Postby DP_Sam » November 11th, 2014, 10:34 am

The iBoot-G2+ will allow local control to override other control methods, or work in conjunction with them.
Based on programming.
Check the manual for the iBoot-G2+ (specifically page 15) http://dataprobe.com/support/iboot/iboot-g2plus.pdf
The power is controlled when the input is connected to ground. When set for On or Off, holding the input to
ground will lock the power in the selected position allowing for manual override of all other control options. By
using both inputs, one set for On and the other for Off, you can use a three position switch to create an On –
Remote – Off switch.
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com
DP_Sam
 
Posts: 123
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ

Re: G2 with external switch - possible ?

Postby sterhv » November 11th, 2014, 11:49 am

DP_Sam wrote:The iBoot-G2+ will allow local control to override other control methods, or work in conjunction with them.
Based on programming.
Check the manual for the iBoot-G2+ (specifically page 15) http://dataprobe.com/support/iboot/iboot-g2plus.pdf
The power is controlled when the input is connected to ground. When set for On or Off, holding the input to
ground will lock the power in the selected position allowing for manual override of all other control options. By
using both inputs, one set for On and the other for Off, you can use a three position switch to create an On –
Remote – Off switch.


Thanks a lot, that's exactly what I was looking for
sterhv
 
Posts: 19
Joined: May 4th, 2014, 6:06 pm

Re: G2 with external switch - possible ?

Postby DP_Sam » November 14th, 2014, 3:47 pm

Glad to help.
Sam Savoye
Dataprobe Tech Support
SSavoye@Dataprobe.com
DP_Sam
 
Posts: 123
Joined: January 21st, 2010, 9:39 am
Location: Allendale, NJ


Return to iBoot

Who is online

Users browsing this forum: No registered users and 1 guest

cron